2.7 Ice Maker Installation
Remove a protective cover before connecting the wire of the ice machine in the box.
Tools Required:
•
1/4 inch copper supply line with shut off valve
•
1/4 inch brass compression nut and ferrule
The copper tubing and shut off valve are available in a kit from your local hardware
or plumbing supply store. Coil enough tubing at the back of the unit to allow
movement for cleaning.
Unplug the appliance to eliminate the danger of electric shock during
installation, you must unplug the refrigerator from its electrical outlet.
Ice Maker
Screws (x2)
Steel Clamp (x1)
Plastic Clamp (x2)
Ice Container
Screws (x2)
Leveling Bracket
Water Valve (x1)
8
Supply Tubing
Leveling Bracket
Screw (x1)
Water Inlet Tube (x1)
Plastic Water
(x1)