Table of Contents
Advertisement
12 Mount the ice maker onto the two screws you installed in step 10. Tighten
screws. Make sure water inlet tube is sitting inside the fill cup.
13 Adjust the leveling bracket to level ice maker. Ice maker is level when gap
between freezer wall and ice maker is the same at the top and bottom. Tighten
screw when level.
Leveling
Bracket
14 Reinstall freezer shelf in lower position. Set ice container on shelf.
15 Locate the holes at the bottom right corner of the rear panel. Holes are only
drilled through cabinet liner. Align water valve bracket with holes. Use a power
drill with a cross screw head bit to drive the two screws through the bracket and
into the cabinet.
Ice Maker
Screw
Ice Container
11
Advertisement
Table of Contents
