E-MON CLASS 3200 METER
7.0 MULTIPLE-LOAD MONITORING
(CONTINUED)
NOTE: One set of current sensors equates to three sensors, one per phase. The
multiplier only applies when extra sets of current sensors are installed on
one meter. If you are using only one set of three current sensors, the mul-
tiplier is not required.
Fig. 22. Single Phase Multi-Load Wiring Diagram.
8.0 PREVENTATIVE/SCHEDULED
MAINTENANCE
The unit is shipped in a calibrated and fully functional tested condition. Since the
unit is factory-calibrated using proprietary firmware algorithms, no internal unit
adjustments are necessary.
This unit contains no internal adjustments, so no preventative or scheduled
maintenance is required.
No cleaning or decontamination procedures are required for this instrument.
62-0397—02
ØA
ØB
N
LOAD
SOURCE
LOAD A
ØA
ØB
N
LOAD
SOURCE
LOAD B
LINE VOLTAGE
CURRENT SENSORS
ØA
ØAØB ØC
N
W B W B W B
32
ØB
ØC
M33204A