Additional Safety Rules - Makita 7104L Instruction Manual

ADDITIONAL SAFETY RULES

1.
Use this tool only to cut holes in wood.
2.
This tool is for cutting holes in flat-sur-
faced wood. Never use it for cutting holes
in a log.
3.
Wear ear protectors.
4.
Handle the cutter chain carefully; it is very
sharp.
5.
Place the workpiece on wood blocks or
short beams to prevent the cutter chain
from hitting the ground, floor, etc., caus-
ing damage to the cutter chain at the time
of hole breakthrough.
6.
Check the cutter chain carefully for cracks
or damage before operation.
Replace cracked or damaged cutter chain
immediately.
7.
Secure the tool to the workpiece firmly.
8.
Inspect for and remove nails or foreign
matter from the workpiece before opera-
tion.
SAVE THESE INSTRUCTIONS
4
9.
Do not operate the tool with the safety
cover open.
10.
Do not wear gloves during operation.
11.
Keep hands away from moving parts.
12.
Remove the tool from the workpiece after
operation to keep it from falling off and
possibly causing injury.
13.
Don't abuse cord. Never yank cord to dis-
connect it from the receptacle. Keep cord
away from heat, oil, water and sharp
edges.
14.
PROPER GROUNDING. This tool should
be grounding while in use to protect the
operator from electric shock.
15.
EXTENSION CORDS. Use only three-wire
extension cords which have three-prong
grounding-type
receptacles which accept the tool's plug.
Replace or repair damaged or worn cord
immediately.
ENB093-1
plugs and three-pole