Honda CR-V 2020 Owner's Manual page 584

uuReplacing Light BulbsuHeadlight Bulbs
■
Low Beam Headlights
Holding clip
Tab
Coupler
582
Passenger side
1. Remove the holding clip using a flat-tip
screwdriver, then remove the upper part of
the window washer reserve tank.
Both side
2. Push the tab to remove the coupler.
3. Rotate the old bulb counter-clockwise to
Bulb
remove.
4. Insert a new bulb into the headlight
assembly and turn it clockwise.
5. Insert the coupler into the connector of the
bulb.
1Low Beam Headlights
Holding clip
Insert a flat-tip screwdriver, lift and remove the center
pin to remove the clip.
Center pin
Insert the clip with the center pin raised, and push
until it is flat.
Push until the
pin is flat.