Honda CR-V 2020 Owner's Manual page 186

uuOperating the Switches Around the Steering WheeluAuto High-Beam
■
How to Turn Off the Auto High-Beam
You can turn the auto high-beam system off. If you want to turn the system off or
on, turn the ignition switch to ON
while the vehicle is stationary.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
184
*1 , then carry out the following procedures
w (
To turn the system off:
With the light switch is in AUTO, pull the lever
toward you and hold it for at least 40 seconds.
After the auto high-beam indicator light blinks
twice, release the lever.
To turn the system on:
With the light switch is in AUTO, pull the lever
toward you and hold it for at least 30 seconds.
After the auto high-beam indicator light blinks
once, release the lever.
1How to Turn Off the Auto High-Beam
If you turn the auto high-beam system off, the system
does not operate until you turn the system on.
Park in a safe place before turning the system off or
on.