Honda CR-V 2020 Owner's Manual page 505

■
RDM On and Off
Indicator RDM Button
■
RDM Conditions and Limitations
The system may not properly detect lane markings and the position of your vehicle
under certain conditions. Some examples of these conditions are listed below.
■
Environmental conditions
• Driving in bad weather (rain, fog, snow, etc.).
• Sudden changes between light and dark, such as an entrance or exit of a tunnel.
• There is little contrast between lane lines and the roadway surface.
• Driving into low sunlight (e.g., at dawn or dusk).
• Strong light is reflected onto the roadway.
• Driving in the shadows of trees, buildings, etc.
• Shadows of adjacent objects are parallel to lane markings.
• Roadway objects or structures are misinterpreted as lane markers.
• Reflections on the interior of the front windshield.
* Not available on all models
Press the RDM button to turn the system on
and off.
u The indicator in the button comes on and
the message appears on the driver
information interface when the system is
on.
uuWhen DrivinguRoad Departure Mitigation (RDM) System
1RDM On and Off
When you have selected Warning Only from the
customized options using the driver information
interface * or the audio/information screen
system does not operate the steering wheel and
braking.
2 Customized Features P. 121, 360
The indicators for the Adaptive Cruise Control (ACC)
with Low Speed Follow, Road Departure Mitigation
(RDM), Vehicle Stability Assist
Vehicle Stability Assist
pressure/TPMS, Collision Mitigation Braking System
(CMBS TM ), and Parking Brake and Brake System
(Amber) may come on along with a message in the
Driver Information Interface after reconnecting the
battery. Drive a short distance at more than 12 mph
(20 km/h). The indicator should go off. If it does not,
have your vehicle checked by a dealer.
Continued
* , the
TM (VSA®) system,
TM (VSA®) OFF, low tire
TM
503