Operation; Maintenance; Optional Accessories - Makita JR103D Instruction Manual

For Model JR105D
► Fig.8: 1. Hex wrench 2. Bolt 3. Loosen 4. Tighten
► Fig.9: 1. Recipro saw blade 2. Hex wrench 3. Hole
for recipro saw blade 4. Blade clamp
To install the recipro/jig saw blade, loosen the bolt by
hex wrench. When installing a recipro saw blade, press
the bolt with the hex wrench to open the slot during
inserting the blade.
► Fig.10: 1. Recipro/jig saw blade 2. Blade clamp
3. Hole for recipro saw blade 4. Hole for jig
saw blade
► Fig.11
You can use both jig saw blades (B type) and recipro
saw blades according to your work. Insert the recipro/
jig saw blade straight into the blade clamp and tighten
it by hex wrench. Pull the recipro/jig saw blade lightly to
make sure that the recipro/jig saw blade does not fall off
during operation.
To remove the recipro/jig saw blade, follow the installa-
tion procedure in reverse.
Hex wrench storage
► Fig.12: 1. Hex wrench 2. Protrusion
When not in use, store the hex wrench as shown in the
figure to keep it from being lost.

OPERATION

CAUTION:
Always press the shoe firmly
against the workpiece during operation. If the
shoe is removed or held away from the workpiece
during operation, strong vibration and/or twisting will
be produced, causing the blade to snap dangerously.
CAUTION:
Always wear gloves to protect
your hands from hot flying chips when cutting
metal.
CAUTION:
Be sure to always wear suitable
eye protection which conforms with current
national standards.
CAUTION:
Always use a suitable coolant
(cutting oil) when cutting metal. Failure to do so will
cause premature blade wear.
CAUTION:
Do not quirk the blade during
cutting.
► Fig.13
Press the shoe firmly against the workpiece. Do not
allow the tool to bounce. Bring the recipro saw blade
into light contact with the workpiece. First, make a pilot
groove using a slower speed. Then use a faster speed
to continue cutting.
► Fig.14
► Fig.15
You can use the switch lever or trigger according to your
work.
NOTE: If the tool is operated continuously until the
battery cartridge has discharged, allow the tool to rest
for 15 minutes before proceeding with a fresh battery.

MAINTENANCE

CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Recipro saw blades
• Jig saw blades (only for Model JR105D)
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
8 ENGLISH