Installation; Led Indicators; Pin Assignment - Digicom 3G Industrial Router VPN Pro Quick Manual

3G Industrial Router VPN Pro

2. INSTALLATION

2.1. LED InDIcators

Name Color
RUN Green
USR Green
PPP Green
rSSi leDS (SigNal level)
None
1 bar (Only the first LED is on)
2 bars (The first and the second LED are on)
3 bars (All the RSSI LEDs are on)

2.2. PIn assIgnmEnt

PiN Power
10 Positive (+)
11 Negative (-)
12 GND (Ground)
DB9 Female Connector
PiN DeBug
1
2
3
4 DRXS
5 GND
6
7
8
9 DTXD
StatuS FuNCtioN
Blinking Router is ready
On Router is starting
Off Router is power off
On/Blinking VPN tunnel/PPPoE/DynDNS/GPS is up
Off VPN tunnel/PPPoE/DynDNS/GPS is down
Blinking Null
On PPP connection is up
Off PPP connection is down
FuNCtioN
No signal or SIM card not installed properly
Signal level: 1-10 (Poor signal level)
Signal level: 11-20 (Average signal level)
Signal level: 21-31 (Good signal level)
rS232 rS485 (2-wire)
Data+ (A)
RXD
TXD
GND
Data- (B)
RTS
CTS
DireCtioN
-
3G Ind. Pro > Device
Device > 3G Ind. Pro
Device > 3G Ind. Pro
-
-
Device > 3G Ind. Pro
3G Ind. Pro > Device
3G Ind. Pro > Device
Installation
2.1