Digicom 3G Industrial Router VPN Pro Quick Manual page 18

3G Industrial Router VPN Pro
Basic @cellular Wan
cellular settings
IteM
Network Provider type Select from "Auto", "Custom" or the ISP name you preset in "Configuration"->"Cellular WAN"->"ISP
APN
Username
Password
Dialup No.
PIN type
connection mode
IteM
connection Mode
Redial Interval
Max Retries
IcMP Detection Primary server Router will ping this primary address/domain name to check that if the current connectivity is active.
IcMP Detection secondary server Router will ping this secondary address/domain name to check that if the current connectivity
IcMP Detection Interval Set the ping interval time.
IcMP Detection timeout Set the ping timeout.
3.6
DescRIPtIoN
Profile".
Auto: Router will get the ISP information from SIM card, and set the APN, username and password
automatically. This option only works when the SIM card is from well-known ISP.
Custom: Users need to set the APN, username and password manually.
Default: Auto
Access Point Name for cellular dial-up connection, provided by local ISP.
Default: Null
User Name for cellular dial-up connection, provided by local ISP.
Default: Null
Password for cellular dial-up connection, provided by local ISP.
Default: Null
Dialup number for cellular dial-up connection, provided by local ISP.
Default: *99***1#
Select from "None", "Input", "Lock", "Unlock".
None: Select when SIM card does not enable PIN lock or PUK lock.
Input: Select when SIM card has enabled with PIN lock or PUK lock. Correct PIN/PUK code need to be
entered.
Lock: Select when user needs to lock the SIM card with PIN or PUK code.
Unlock: Select when user needs to unlock the SIM card with PIN or PUK code.
Note: Please ask your local GSM ISP to see whether your SIM card requiring PIN or not.
If you want to change with a new PIN code, you need to input new PIN code in item "New PIN Code"
and "Confirm New PIN Code".
You can go to tab "Status" -> "Event/Log" and find out "AT+CPIN?" to check what the status of the SIM
card is.
Default: None
DescRIPtIoN
Select from "Always Online" and "Connect On Demand".
Always Online: Auto activates PPP and keeps the link up after power on.
Connect On Demand: After selection this option, user could configure Triggered by Serial Data, Triggered
by Periodically Connect and Triggered by Time Schedule.
Note: If you select several connect on demand polices, router only have to meet one of them to be
triggered.
Default: connect on Demand
Router will automatically re-dial with this interval when it fails communicating to peer via TCP or UDP.
Default: 30
The maximum retries times for automatically re-connect when router fails to dial up.
After maximum retries, router will reboot the wireless module. If router still cannot dial up successfully, it
will try to switch to the other SIM card. Then router will re-connect with the other SIM card with maximum
retries.
After successful connection, the Max Retries counter will be set to 0.
Default: 3
Default: 8.8.8.8
is active.
Default: 8.8.4.4
Default: Null
Default: 30
Configuration settings over web browser