Digicom 3G Industrial Router VPN Pro Quick Manual page 19

3G Industrial Router VPN Pro
ICMP Detection Retries If Router ping the preset address/domain name time out continuously for Max Retries time, it will consider
that the connection has been lost.
Default: 3
Reset The Interface
Enable to reset the cellular/ETH interface after the max ICMP detection retries.
Default: 3
Serial Output Content The content which output to the serial device which connect to router and inform it that router is ready
to receive serial data.
Default: Null
Triggered by Serial Data Tick this check box to allow router automatically connects to cellular network from idle mode when there
is data comes out from serial port.
Default: Enable
Triggered by Tel
Tick this check box to allow router automatically connects to cellular network from idle mode when make
a voice call to router.
Default: Disable
Triggered by SMS
Tick this check box to allow router automatically connects to cellular network from idle mode when send
a specific SMS to router.
Default: Disable
SMS Connect Command Users shall send this specific SMS to trigger router to connect to cellular network.
Default: Null
SMS Disconnect Command Users shall send this specific SMS to trigger router to disconnect to cellular network.
SMS Connect Reply
When router connects to cellular network, it will automatically send out this SMS to specific users (set
in the Phone Group).
Default: Null
SMS Disconnect Reply When router disconnect from cellular network, it will automatically send out this SMS to specific users
(set in the Phone Group). Null
Phone Group Click to add Phone Group to Set specific users' phone Book and which phone Group they are belonged
to.
Default: Null
Periodically Connect
Tick this check box to allow router automatically connects to cellular network with preset interval which
you preset in Periodically Connect Interval.
Default: Enable
Periodically Connect Interval Periodically Connect Interval for Periodically Connect.
Default: 300
Time Schedule
Select the Time Range to allow router automatically connects to cellular network during this time range.
Default: NULL
Time Range Adding the Time Range for Time Schedule. You can set the days of one week and at most three ranges
of time of one day.
Default: Null
Dual SIM Policy
ITEM DESCRIPTION
Main SIM Card
Set the preferred SIM card from SIM 1, SIM 2 or Auto.
Default: SIM1
Switch to backup SIM card when connection fails Router will switch to another SIM card if main SIM card fail to connect to network.
Default: Disable
Switch to backup SIM card when roaming is detected Router will switch to backup SIM card when preferred SIM card is roaming.
Default: Disable
Preferred PLMN The identifier for Router to check if it is in home location area or in roaming area, and decide if it needs
to switch back to preferred SIM card.
Default: Null
Switch to backup SIM card when data limit is exceeded If the SIM card that the router worked with currently has reached the
data traffic limitation you preset, it will switch to the other SIM card.
Default: Disable
Max Data limitation(MB) Set the monthly data traffic limitation.
Default: 100
Date of Month to Clean Set one day of month to restore the used data to 0.
Default: 1
Configuration settings over web browser
Null
3.7