Specifications - Honda F220K1 Owner's Manual

11. SPECIFICATIONS

Model
Description Code
Dimensions and weight
Type
Overall length
Overall height
Overall width
Dry mass [weight]
Engine
Model
Type
Displacement
Bore × Stroke
Engine net power
(in accordance with SAE J1349*)
Spark plug
Ignition system
Fuel tank capacity
[with engine in level
position]
Engine oil capacity
Clutch
Transmission oil capacity
Carbon dioxide (CO2)
emissions**
* The power rating of the engine indicated in this document is the net power
output tested on a production engine for the engine model and measured in
accordance with SAE J1349 at 4,800 min
engines may vary from this value.
Actual power output for the engine installed in the final machine will vary
depending on numerous factors, including the operating speed of the engine
in application, environmental conditions, maintenance, and other variables.
** The CO2 measurement results from testing over a fixed test cycle under
laboratory conditions a(n) (parent) engine representative of the engine type
(engine family) and shall not imply or express any guarantee of the
performance of a particular engine.
42
DET2
1,280 mm (50.4 in)
1,035 mm (40.7 in)
615 mm (24.2 in)
30 kg (66 lbs)
4 stroke, OHV, single cylinder, forced air cooled
57.3 cm
45.0 × 36.0 mm (1.77 × 1.42 in)
1.5 kW (2.0 PS)/4,800 min
CR4HSB (NGK)
U14FSR-UB (DENSO)
Transistor magneto ignition
0.70 L (0.18 US gal, 0.15 lmp gal)
0.30 L (0.32 US qt, 0.26 lmp qt)
Shoe clutch
0.90 L (0.95 US qt, 0.79 lmp qt)
Please refer to "CO2 Information List" on
www.honda-engines-eu.com/co2
-1
(Engine Net Power). Mass production
F220 K1
FAAJ
GET2
31 kg (68 lbs)
GXV57T
3
(3.50 cu-in)
-1