Honda F220K1 Owner's Manual page 17

7. Engine oil level
CAUTION:
• Running the engine with insufficient oil can cause serious engine
damage.
• Be sure to check the tiller on a level surface with the engine stopped.
Make sure the area around the oil filler cap is clean.
1. Remove the oil filler cap. Check the oil level with the level gauge looking into
the filler neck.
2. If the oil level is low, fill to the upper limit of the level gauge with the
recommended oil.
3. Screw in the filler cap securely.
Recommended oil
Use 4-stroke motor oil that meets or exceeds the
requirements for API service category SE or later
(or equivalent).
Always check the API service label on the
oil container to be sure it includes the letters SE or
later (or equivalent).
SAE 10W-30 is recommended for general use.
Other viscosities shown in the chart may be used
when the average temperature in your area is
within the indicated range.
Lubrication oil specifications necessary to maintain the performance of the
emissions control system: Honda genuine oil.
CAUTION:
Using nondetergent oil or 2-stroke engine oil will shorten the engine's
service life.
OIL FILLER CAP
14
UPPER LIMIT
AMBIENT TEMPERATURE
LOWER LIMIT