Table of Contents
Advertisement
Sensepoint XCD RFD Technical Manual
12 Servicing
Take care when handling sensors as they may contain corrosive solutions. Do not tamper
or in any way dis-assemble the sensor. Do not expose to temperatures outside the
recommended range. Do not expose sensor to organic solvents or flammable liquids.
Caution: The following procedure should be followed carefully and only performed by
A fault condition will be signalled by the detector if the sensor is removed with the unit
12.1 Sensor replacement
The sensors that are used with the Sensepoint XCD RFD have no serviceable parts.
When they have reached the end of their operational life, simply replace the sensor or the
sensor cartridge.
Only a qualified installation engineer should service the sensor. Ensure power is off before
carrying out any maintenance procedures. The only maintenance required is sensor
replacement and filter changing (if fitted to an accessory).
WARNINGS
suitably trained personnel.
under power.
Main body of sensor
Fiter
Black plastic retainer
Diagram 13: Sensor Replacement
32
SPXCDHMRFENU Issue 1
Advertisement
Table of Contents
