Honeywell Sensepoint XCD RFD Technical Manual page 11

Remote flammable detector

Hide thumbs Also See for Sensepoint XCD RFD:

Table of Contents

Sensepoint XCD RFD Technical Manual

SPXCDHMRFENU Issue 1

(MODBUS ID SETTING)

Set id>>Set ModBus slave ID>>Set Baud rate>>Set Parity

1) Slave ID shall be set 1~247

2) Baud rate setting 9600 or 19200

3) Parity setting (No, Even, Odd)

From the Configuration Mode screen, select''. To set the ModBus Slave ID, use the up-

down ''switches to move to the desired position and use ''to select it. Again, using

the''switches, increment or decrement the value until the desired value appears,

selects the value and moves to the next setting.

The communications baud rate and Parity Setting can also be set from this screen by

using the'' switches to navigate to the baud rate display then selecting ''. Using the

''switches, highlight the proper baud rate or parity setting and select''. Default is

Slave ID 1, 19200bps and even parity.

Note: Set ID menu is available only for XCD equipped with Modbus option.

Table of Contents