RIDGID K-4310 FXP Manual page 9

Table of Contents

Advertisement

Available languages

Available languages

Tool Status Lights
Cable Size Selection
Recording Active,
Selections Locked
Figure 3 – Display/Icons
ON/OFF
FOR/OFF/REV
Switch
Switch
OFF
Any Position
ON
Any Position
ON
Any Position
ON
FOR
ON
REV
Figure 4 – Machine Operation Modes
Icon
Blinking Light
Blue
Yellow
Yellow
Red
Red
Purple
Purple
Red
Figure 5 – Tool Status Lights
999-995-420.10_REV A
Foot
Display
Tool Status
Switch
Any Position
OFF
OFF
ON
See Figure 5
OFF
OFF
ON
ON
See Figure 5
ON
ON
See Figure 5
Solid Light Meaning
Connection to RIDGID Link app possible.
Blue (30s)
Connection to RIDGID Link app established.
Battery charge is low and machine operation can stop anytime soon. Battery
must be recharged.
Battery low and machine will not operate. Recharge battery/insert fully charged
battery.
Yellow
Maintenance is required. Consult RIDGID Link app for more information.
Machine has stopped due to an event exceeding usable limits (e.g., current,
temperature, or stability). Confirm proper set-up and restart use. Consult RIDGID
Link app for more information.
Machine has malfunctioned and will not operate. Remove battery and allow
Red
Machine to rest, then reinsert battery. If light still ON, have machine serviced.
Consult RIDGID Link app for more information.
Firmware update in process, machine cannot be used while updating. Consult
RIDGID Link app for more information.
Firmware update was interrupted and not completed; machine cannot be used.
Continue and complete update per app instructions.
K-4310 FXP Drum Machine
Description
Lights
OFF
Machine OFF – No power to anything
ON
Machine Motor OFF, Power to Display – Display set-
tings can be changed, see Figure 2A/B
OFF
Machine in Hibernation Mode to reduce battery usage.
Machine will go to this mode if no user inputs for 15
minutes or more – Move ON/OFF switch to OFF and
back to ON to use
Machine will run in Forward rotation when Foot Switch
is depressed (normal operating mode, generally used
for all drain cleaning, both advancing and retrieving
cable)
Machine will run in Reverse rotation when Foot Switch
is depressed (Only used for specific cases called out in
the manual)
Recording/Time of
Recording
Cable Travel Indication ft/m
Cable Length Selector
7 7

Advertisement

Table of Contents
loading

Table of Contents