Using the appliance
Use the and arrow buttons or the
area between them in the
navigation area to use the combination
steam oven.
As soon as you reach a confirmable
value, message or setting, the
OK sensor control will light up orange.
Selecting a menu option
Touch the or arrow buttons or
swipe to the right or left in the
area until you reach the
desired menu option.
Tip: If you press and hold an arrow
button, the list continues scrolling
automatically until you release the arrow
button.
Confirm your selection with OK.
Changing a setting in a list
A tick will appear beside the current
setting.
Touch the or arrow buttons or
swipe to the right or left in the
area until you reach the
desired value or setting.
Confirm with OK.
The setting is now saved. This will take
you back to the previous menu.
22
Changing the setting with a
segment bar
Some settings are represented by a bar
with seven segments. If all
of the segments are illuminated, the
maximum value is selected.
If none of the segments are illuminated,
or only one of them is, the minimum
value is selected or the setting is
switched off altogether (e.g. volume).
Touch the or arrow buttons or
swipe to the right or left in the
area until you reach the
desired setting.
Confirm your selection with OK.
The setting is now saved. This will take
you back to the previous menu.
Selecting a function or
operating mode
The sensor controls for the functions
and operating modes (e.g.
are located above the display (see
"Controls" and "Settings").
Touch the sensor control for the
desired function.
The sensor control on the fascia panel
lights up orange.
For functions and operating modes:
set values such as the temperature.
Under
Further
: scroll through the
lists until you reach the desired menu
option.
Confirm with OK.
Further
)