Wiring The Plug-In Connection; Flush Mounting - Honeywell HCM 200 Manual

The Hometronic Manager can be mounted:
•
Via a flush-mounted box with the transformer HTU 10 (flush
mounting) or
•
At a suitable point on the wall with the transformer HTS 10 for
switching cabinet mounting or with the plug-in power supply
unit HN 10 (surface mounting).
For dimensions of the Honeywell transformers, please refer to
the appendix from Page 23 on.

Wiring the plug-in connection

Lay the cable from the plug-in power supply unit or trans-
►
former to the mounting site.
Wire the plug-in connection.
►

Flush mounting

Lay the cable directly from the
►
flush-mounted box to the retainer
basket of the mounting panel.
Hold the plug-in connection as
►
shown in the adjacent figure (the
numbers 1 to 5 stand on their
head).
Latch the plug-in connection into
►
the retainer basket.
Mounting
Technical Data
9