Mounting
Activating the power supply
Fastening the operating unit
Place the operating unit slightly obliquely against the mounting
►
panel (1).
Slide the operating unit upwards until the fastening hooks
►
touch the top.
Press the operating unit flush against the mounting panel (2).
►
Slide the operating unit down until its bottom projects over the
►
mounting panel (3).
Insert and tighten the screw (4). If the screw does not find any
►
hold, slide the operating unit further downwards.
The operating unit is connected firmly to the mounting panel.
Activating the power supply
Depending on whether a plug-in power supply unit or a trans-
former is used:
Plug in the plug-in power supply unit or
►
Activate the fuse.
►
12
3
4