Honeywell HCM 200 Manual page 18

An * is displayed next to the modules already assigned.
Turn the Dial button until the
►
desired module is selected, e.g.
Press the Dial button.
►
An * is displayed next to the se-
lected module.
The module is assigned.
Assigning an HS 30 device switch for the boiler demand
Wire the device switch to the boiler demand as described from
►
Page 3 on.
Activate the teach-in at the device switch as described in the
►
mounting instructions of the module.
Change to the "Installation" submenu at the Hometronic Man-
►
ager as described on Page 14.
The following text is displayed:
Turn the Dial button until "Boiler
►
demand" is selected.
Press the Dial button.
►
The following text is displayed:
Assigning modules and rooms
MODULE-2
MODULE-3
MODULE-4
MODULE-5
MODULE-2
MODULE-3
MODULE-4
MODULE-5
HEATING
SHUTTERS
DEVICES/LIGHTS
SENSOR
SHUTTERS
DEVICES/LIGHTS
SENSOR
BOILER DEMAND
SWITCHING MODULE
FROST PROTEC.
SENSOR
Technical Data
*
*
*
17