Table of Contents
Advertisement
6.
Clip the sensor unit to your running pants.
✹
IMPORTANT!
• To keep the sensor unit from shaking while running, wear your running pants
with the upper part of the waistband above your hipbone. Sufficiently tighten
the drawstring of your running pants or wear pants with a tight waist.
• Be sure to wear the sensor unit with its clip (logo side) facing outwards.
Lock the sensor unit in place so it is straight vertical and at the center of the
small of your back.
• Attach the sensor unit at the height that is in line with your hip bone.
Hip line
Waist center line
• To keep the sensor unit from slipping while running, clip it firmly onto the
elastic or drawstring of your running pants. Do not use the sensor unit with
running pants that have a wide distance between their rubber waistband or
drawstring and top edge.
• Take care not to pinch your fingers with the clip.
• If you are wearing a pouch or other accessories, take care that they do not
come into contact with the sensor unit. Subjecting the sensor unit to impact
can make correct measurement impossible.
• Do not attach the sensor unit as shown below. Doing so will result in
inaccurate measurement.
NO
At an angle
NO
Not fully clipped
NO
Front of your body or not at the waist
Clip facing
outwards
NO
Off-center
NO
Clip side towards your body
NO
Loose running pants drawstring
8
Advertisement
Table of Contents
