Table of Contents
Advertisement
Configuring Initial Settings
To use this sensor unit for run data measurement, you need to install the
Runmetrix app on your smartphone.
After installing the Runmetrix app on your smartphone, you should input your user
name, gender, and other personal data with the app and register your sensor unit.
For information about the Runmetrix app, visit the CASIO website.
Installing the Runmetrix App on Your Phone
Go to Google Play or the App Store, search for the Runmetrix app, and then
install it on your phone.
On Google Play or the App Store, check the required OS version (Android or
iOS) for the Runmetrix app.
App Operation Guarantee
CASIO COMPUTER CO., LTD. makes no guarantees as to the ability of the
Runmetrix app to run on any particular smartphone or tablet.
✹
IMPORTANT!
• The functions and required operating environment of the Runmetrix app are
subject to change without notice.
Registering the Runmetrix App (Pairing)
✹
IMPORTANT!
• This sensor unit must be paired with a smartphone in order to use it. Be sure to
pair the sensor unit with a smartphone before trying to use it.
• Turning on the sensor unit after purchasing it will cause its LED to flash red,
indicating that the sensor unit is not paired with a phone.
• Only one phone at a time can be connected with this sensor unit.
• Some phone models may not work with this sensor unit.
• If the sensor unit is already registered to the app, attempting to re-register the
sensor unit will cause the app to temporarily delete the existing registration and
then re-register the sensor unit.
• Use the Runmetrix app to configure sensor unit settings.
• Turn on the Bluetooth setting of your phone and then perform the following
operations.
1.
On your phone, start up the Runmetrix app.
2.
In Runmetrix, tap "Create new account" and create a new
account.
• If you have already obtained a CASIO ID with another CASIO product, log
in and configure your profile settings.
3.
Use Runmetrix to input your user name and other basic
information, and then tap "Register".
4.
Check to make sure that the sensor unit is turned off.
• If the sensor unit is turned on, press and hold the sensor unit button for
about two seconds to turn it off.
4
Advertisement
Table of Contents
