Table of Contents
Advertisement
Troubleshooting
• If the sensor unit operation becomes abnormal during use, hold down its
button for about 15 seconds to reset it. This will initialize the sensor unit
without affecting measurement data.
– During the 15 seconds you are holding down the sensor unit button, the
sensor unit may beep, and the LED will turn on and off. Keep the button
depressed.
– There is no sound to let you know that the reset operation is complete.
• If you cannot receive GPS signals even though you are in an open area, hold
down the sensor unit button for about 15 seconds to reset and then try again.
If you still cannot receive signals, contact your local CASIO Service Center.
• If the LED flashes red at high speed when you turn on the sensor unit, it may
mean there is some internal problem. Contact your local CASIO Service
Center. Note that the current status of the sensor unit is indicated by the
flashing speed (fast or slow) of the LED.
Main Specifications
Notification Functions Bluetooth
External Connection
Micro USB port (USB charging)
Port
Built-in Sensors
9-Axis sensor (acceleration, gyro, magnetic),
barometric pressure
GPS
GPS, GLONASS, QZSS
Recording Capacity
Approximately 200 km (depending on usage conditions)
Power Supply
Rechargeable lithium-ion battery (built-in)
Battery Life
Approximately 20 hours (continuous use at 25°C)
Sensor Unit
39.9 (W) × 62.1 (H) × 18.2 (D) mm
Dimensions
43.7 (W) × 63.6 (H) × 19.6 (D) mm
(Including sensor unit cover)
Weight
Approximately 37 g
Approximately 44 g (Including sensor unit cover)
®
5.0 (Low Energy)
11
Advertisement
Table of Contents
