Errors - Hitachi UX2 User Manual

1.6.4 Errors

(1) Errors during external communications
Errors during print content transmission and print data call-up
No.
Not all received print contents could be held in
1
buffer because its capacity was exceeded
Number of print items of received contents is
2
more than 9. Or, received contents consist of
more than 81 characters.
Calendar or count character was included in print
3
data call-up transmission
When print content was transmitted to the item
4
number(s) which does NOT exist.
No.
Text was transmitted together with another text
1
(2) Errors during printing
No.
The number of received contents in buffer was
1
less than "Data number at Fault".
Print start signal was received during print data
2 switching immediately after ACK was returned to
"restart printing"
(3) Error when status is changed
No.
Calendar characters or count characters were included
1
to existing print contents when restored to online.
Condition
Error when buffer is cleared
Condition
Errors during printing
Condition
Error when status is changed
Condition
63
Type of error
NAK is returned.
However, this will not cause any
external communication error.
External communication error 030
External communication error 027
External communication error 027
Type of error
External communication error 002
Type of error
Fault "Communication Buffer Fault"
(Ink ejection does not stop)
Fault "Invalid Data Change Timing"
Type of error
Confirmation message
"Communication buffer error"