Makita DUH501 Instruction Manual page 10

7. Align the protrusions on the shear blades vertically
at the same position.
► 1. Protrusion
8.
Attach the felt pad to the shear blades.
► 1. Felt pad
9. Insert the protrusion on the shear blades to the
hole on the rod, then align the position of the felt pad
with the holes on the tool, and then attach new sleeves.
1
1
2
1
► 1. Protrusion 2. Hole 3. Felt pad 4. Sleeve
NOTICE:
inner periphery of the hole of the rod.
NOTICE:
10. Align the holes on the shear blades with the holes
on the tool, and then tighten 2 screws to fix the shear
blades.
► 1. Screw 2. Hole
10 ENGLISH
3
4
Apply a small amount of grease to the
Be careful not to lose the sleeves.
1
1
2