NETGEAR WG511T User Manual page 44

User Manual for the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T
Enter the SSID. This is also called the Wireless Network Name.
b.
Note: You will not get a wireless network connection unless the network SSID matches
exactly what is configured in the access point.
Tip: You can click the Network tab to view a list of the available wireless networks and
their SSIDs at the location where you are.
3. Save your settings in a Profile.
Type a descriptive name for the
a.
Click Save Profile.
b.
Click Apply.
c.
Click Close to exit the configuration utility or Cancel to return to the previous settings
d.
4. Verify wireless connectivity to your network.
Verify connectivity by using a browser such as Netscape or Internet Explorer to connect to the
Internet, or check for file and printer access on your network.
You can check the status bar in the configuration utility for the current connection status.
Note: If you cannot connect, see the
accessing network resources, the Windows Client and File and Print Sharing software might
not be installed and configured properly on your computers. Please refer to
Computers for TCP/IP Networking" on page
4-4
Profile in the "Profiles" field.
All the configuration settings are saved in this profile.
"Troubleshooting" on page 3-14. Also, for problems with
C-1.
"Preparing Your
Configuration