NETGEAR WG511T User Manual page 31

User Manual for the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T
Install the NETGEAR 108 Mbps Wireless
PC Card 32-bit CardBus WG511T .
Locate an available CardBus slot on the
a.
side of your notebook. Hold the PC Card
with the NETFGEAR logo facing up and
insert it into the CardBus slot.
After a short delay, the Found New
Hardware Wizard displays.
Follow the Found New Hardware
b.
Wizard steps, click Finish when done,
and if prompted, restart your computer.
Next, you will be prompted to choose the
c.
country where you are located. Select
your location from the list.
You should see the WG511T system tray
icon on the right in the lower right
portion of the Windows task bar.
Basic Setup
Add New Hardware Wizard
Note: If Windows warns about a Digital
Signature Not Found, click Yes to continue.
WG511T System Tray Icon
3-9