Table of Contents
Advertisement
Note: You must configure all the wireless devices with the same KEY values to
communicate.
Access Control
The Access Control window lets you control the network access privilege of the
stations through the HE102 Wireless Access Point. Follow these steps:
1. Choose the Access Control option from the AP Setup menu in the HE102
Web Server home page.
2.
Select the access control options, shown below, then select Reboot AP.
CONFIGURATION
Specifies the state of the Access Control List: Disable or Enable.
Access Control
Default: Disable
Specifies the MAC address for the station to be included in the Access
MAC Address
Control List.
Specifies the current state of each station, Allow or Deny.
Access Control
Default: Allow
DESCRIPTION
25
Advertisement
Table of Contents
