Table of Contents
Advertisement
LED
STATUS
Power
Ethernet
(Lnk/Activity)
Amber Blink
Very Slow Blink
WLAN
(Link/Activity)
System Requirements
Before installing the HE102, make sure of you meet the following requirements:
♦
A 10/100 Mbps Local Area Network device such as hub or switch.
♦
A Category 3 or 5 UTP Ethernet cable with RJ-45 connector
♦
An A/C Power outlet (100-240 V, 50-60 HZ)
♦
A Web browser for configuration: Microsoft I.E 5.0 or above or Netscape
Navigator 4.7 or later version
♦
One computer with TCP/IP protocol installed
Off
No Power
On
Power On
Blink
Indicates:
1. running self-test, or
2. loading software, or
3. system fault
Off
Indicates no Ethernet link detected
Green On
100 Mbps Fast Ethernet link detected, no activity
Green Blink
Indicates data traffic on the 100 Mbps LAN
Amber On
10 Mbps Ethernet link detected but no activity
Indicates data traffic on the 10 Mbps LAN
Off
Indicates no wireless link
Looking for network association
Slow Blink
Associated with network but no activity
Fast Blink
Indicates the HE102 is transmitting or receiving
data through wireless links
14
DESCRIPTION
Advertisement
Table of Contents
