Table of Contents
Advertisement
Reference Manual for the 54 Mbps Wireless Travel Router WGR101
In your IP network, each computer and the router must be assigned a unique IP addresses. Each
computer must also have certain other IP configuration information such as a subnet mask
(netmask), a domain name server (DNS) address, and a default gateway address. In most cases,
you should install TCP/IP so that the computer obtains its specific network configuration
information automatically from a DHCP server during bootup. For a detailed explanation of the
meaning and purpose of these configuration items, refer to
The WGR101 wireless travel router is shipped preconfigured as a DHCP server. The router assigns
the following TCP/IP configuration information automatically when the computers are rebooted:
•
computer or workstation IP addresses—192.168.0.2 through 192.168.0.254
•
Subnet mask—255.255.255.0
•
Gateway address (the router)—192.168.0.1
These addresses are part of the IETF-designated private address range for use in private networks.
Configuring Windows 95, 98, and Me for TCP/IP Networking
As part of the PC preparation process, you need to manually install and configure TCP/IP on each
networked PC. Before starting, locate your Windows CD; you may need to insert it during the
TCP/IP installation process.
Install or Verify Windows Networking Components
To install or verify the necessary components for IP networking:
On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.
1.
Double-click the Network icon.
2.
The Network window opens, which displays a list of installed components:
C-2
February 2005 (202-10034-03)
"Appendix B, "Network
Preparing Your Network
Basics."
Advertisement
Table of Contents
Troubleshooting
