NETGEAR WGR101 Reference Manual page 46

Reference Manual for the 54 Mbps Wireless Travel Router WGR101
This screen shows the following parameters:
Table 5-1. Menu 3.2 - Wireless Travel Router Status Fields
Field
Hardware version
Firmware Version
Wireless Access Point
Name (SSID)
Region
Channel
Mode
Wireless AP
Broadcast Name
Wireless LAN
(multi-user mode only)
MAC Address
IP Address
DHCP
IP Subnet Mask
5-2
Description
This field displays the hardware version of the router.
This field displays the router firmware version.
These parameters apply to the Wireless port of the router.
This field displays the wireless network name (SSID) being used by the
wireless port of the router. The default is NETGEAR-TRAVEL.
This field displays the geographic region where the router being used. It
may be illegal to use the wireless features of the router in some parts of
the world.
Identifies if the channel the wireless port is using. See
Channels" on page D-2 for the frequencies used on each channel.
Identifies if the 802.11 mode: g and b; g only; b only.
Identifies if the access point is on.
Identifies if the access point is broadcasting the SSID.
These parameters apply to the wireless LAN (WLAN) port of the router.
This field displays the Media Access Control address being used by the
WLAN port of the router.
This field displays the IP address being used by the WLAN port of the
router. The default is 192.168.0.1
Identifies if the router's built-in DHCP server is active for the WLAN
attached devices.
This field displays the IP Subnet Mask being used by the WLAN port of
the router. The default is 255.255.255.0
February 2005 (202-10034-03)
"Wireless
Management