NETGEAR WGR101 Reference Manual page 28

Reference Manual for the 54 Mbps Wireless Travel Router WGR101
Figure 3-5: Computer connected via Ethernet cable to WGR101 wireless travel router
Connect an Ethernet cable to the wireless travel router.
3.
Check the status lights and verify the following:
Power: When you first turn on the router, the power light blinks during the
diagnostic self test, then turns solid green.
Ethernet: The Ethernet port light on the wireless travel router should be lit. If not,
make sure the Ethernet cable is securely attached.
Wireless: The Wireless light should be lit. If the Wireless light is not lit, see the
Basic Setup Troubleshooting Tips below.
Open a Web browser such as Internet Explorer on the computer to connect to the wireless
4.
travel router. The wireless travel router will automatically connecting to the browser.
A login window opens:
Figure 3-6: Login window
3-6
February 2005 (202-10034-03)
Connecting the Router to the Internet