Restoring The Default Configuration And Password; Using The Reset Button; Problems With Date And Time - NETGEAR RangeMax DG834N Reference Manual

DG834N RangeMax NEXT Wireless ADSL2+ Modem Router Reference Manual

Restoring the Default Configuration and Password

This section explains how to restore the factory default configuration settings, changing the
router's administration password to password and the IP address to 192.168.0.1. You can erase the
current configuration and restore factory defaults in two ways:
• Use the Erase function of the Web Configuration Manager (see
Erasing Your Settings" on page
• Use the Default Reset button on the rear panel of the router. Use this method for cases when
the administration password or IP address is not known.

Using the Reset button

To restore the factory default configuration settings without knowing the administration password
or IP address, you must use the Default Reset button on the rear panel of the router.
1. Press and hold the Default Reset button until the Power LED turns red (about 5 seconds).
2. Release the Default Reset button. The LED will blink red three times and then turn green when
the router has reset to the factory default state. Wait for the router to reboot.

Problems with Date and Time

The E-mail menu in the Content Filtering section displays the current date and time of day. The
RangeMax NEXT Wireless ADSL2+ Modem Router uses the Network Time Protocol (NTP) to
obtain the current time from one of several Network Time Servers on the Internet. Each entry in
the log is stamped with the date and time of day. Problems with the date and time function can
include:
• Date shown is January 1, 2000
Cause: The router has not yet successfully reached a Network Time Server. Check that your
Internet access settings are configured correctly. If you have just completed configuring the
router, wait at least five minutes and check the date and time again.
• Time is off by one hour
Cause: The router does not automatically sense Daylight Savings Time. In the E-mail menu,
check or uncheck the box marked "Adjust for Daylight Savings Time".
Troubleshooting
5-1).
v1.0, May 2006
"Backing Up, Restoring, or
7-9