NETGEAR RangeMax DG834N Reference Manual page 83

DG834N RangeMax NEXT Wireless ADSL2+ Modem Router Reference Manual
a. Click the Add button to open the Edit Menu, shown in
Figure 6-6
b. Type a route name for this static route in the Route Name box under the table. This is for
identification purpose only.
c. Select Private if you want to limit access to the LAN only. The static route will not be
reported in RIP.
d. Select Active to make this route effective.
e. Type the Destination IP Address of the final destination.
f. Type the IP Subnet Mask for this destination. If the destination is a single host, type
255.255.255.255.
g. Type the Gateway IP Address, which must be a router on the same LAN segment as the
router.
h. Type a number between 2 and 15 as the Metric value. This represents the number of
routers between your network and the destination. Usually, a setting of 2 or 3 works.
Advanced Configuration
v1.0, May 2006
Figure 6-6.
6-11