How To Schedule Firewall Services - NETGEAR RangeMax DG834N Reference Manual

DG834N RangeMax NEXT Wireless ADSL2+ Modem Router Reference Manual
Select the Adjust for daylight savings time check box if your time zone is currently in daylight
savings time.
Note: If your region uses Daylight Savings Time, you must manually select Adjust
for Daylight Savings Time on the first day of Daylight Savings Time, and clear
it at the end. Enabling Daylight Savings Time will cause one hour to be added
to the standard time.
4. The wireless modem router has a list of NETGEAR NTP servers. If you would prefer to use a
particular NTP server as the primary server, enter its IP address under Use this NTP Server.
5. Click Apply to save your settings.

How to Schedule Firewall Services

If you enabled services blocking in the Block Services menu or Port forwarding in the Ports menu,
you can set up a schedule for when blocking occurs or when access is not restricted.
1. Log in to the wireless modem router at its default LAN address of http://192.168.0.1 with its
default User Name of admin, default password of password, or using whatever Password and
LAN address you have chosen for the wireless modem router.
2. Select the Schedule link of the Security menu to display menu shown above in
3. To block Internet services based on a schedule, select Every Day or select one or more days. If
you want to limit access completely for the selected days, select All Day. Otherwise, to limit
access during certain times for the selected days, enter Start Blocking and End Blocking times.
Note: Enter the values in 24-hour time format. For example, 10:30 am would be 10
hours and 30 minutes and 10:30 pm would be 22 hours and 30 minutes. If you
set the start time after the end time, the schedule will be effective through
midnight the next day.
4. Click Apply to save your changes.
4-14
v1.0, May 2006
Figure 4-11.
Protecting Your Network