The Home Screen - Cisco TelePresence CE9.13 User Manual

Introduction

The Home Screen

Upper left corner
of the screen
contains the More
icon (>) which
provides access
to Standby mode,
System information
and the Do Not
Disturb feature.
Tip When set to Do Not Disturb, ringtones are muted and call attempts made by
others to reach you appear as missed calls. You may, however, place calls as
D15097.23 Cisco TelePresence SX10, SX20 User Guide JUNE 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
The Call button The Share button
located to the left is located to
in the lower part the right in the
of the display. lower part of the
display.
much as you like.
The Camera
Control menu icon
is located in the
upper right corner
of the display.
If a messaging
system exists
for your device,
access messages
from here.
As default, there is a 60 minutes timeout on the Do not disturb (after which the
device returns to normal operation), but this may have been changed to a different
setting by your Video Support Team.
Operating tips
Use the Cursor controls the remote
control to move about the screen
and press OK/Enter to open the
selected menu field.
Use the Cancel key to exit a menu
(and return to the Home screen)
undoing any changes. Use the Back
key to go one step back.
The remote control buttons are
described on the following pages.
The Intelligent Proximity feature
allows you to share, see and capture
content from a video device wirelessly
on your own device. You can also use
your own device to control calls on
the video device. See also "Intelligent
Proximity" on page 21.
4