Canopy Seals Replacement Parts; Porthole Door Replacement - GE Giraffe OmniBed Carestation CS1 Service Manual

Table of Contents

Advertisement

Chapter 7: Repair Procedures

Porthole Door Replacement

c.
Slide the short south seal to the side.
d.
Unsnap the notched north seal by pulling down the
ends.
21.
Repeat step 10 to reinstall the seals.
22.
Perform the checkout procedures in Chapter "Repair Procedures" on page 7-1.
Warning: After performing any repair or calibration, always perform service checkout
!
procedures before putting the device back into service.

7.1.1 Canopy Seals Replacement Parts

Use the following kits to service canopy seals:
Kit
Corner Cover Replacement
Seal Replacement
Hardware Replacement
Small Parts Replacement Kit
7.2 Porthole Door Replacement
Refer to
"Figure 8-8 Side Panel
1.
Use a flat edge screwdriver to pry off the hinge cover.
2.
Open the door to unload the springs.
3.
Slide the hinge pin down, out the hole at the bottom of the hinge.
7-16
Part Number
M1208283
M1208284
M1208285
M1224510
(East/West)".
Service Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents