Makita XGT GML01 Instruction Manual page 8

2. Insert the frame into the grass basket as far as it
will go while holding the handle of the frame.
1
Fig.7
► 1. Handle
NOTICE:
Do not insert the handle into the grass
basket. Be sure to insert the frame along the stitch of
the grass basket.
3.
Make sure that there is no sagging on the corners
of the grass basket.
Fig.8
4. Open the upper clip, and attach it to the frame.
Fig.9
5. Attach all the other clips as shown in the figure.
Make sure that all the clips are securely attached to the
frame.
1
Fig.10
► 1. Clip
Installing or removing the grass
basket
To install the grass basket, follow the steps below.
1. Open the rear cover.
Fig.11
► 1. Rear cover
8 ENGLISH
1
1
1