Makita DOLMAR PS-32C Repair Manual page 13

04 CLUTCH
Inserting the flyweights
Hook the springs as shown in the illustration.
The press the flyweights onto the guide. To do
this, first push on one flyweight, then put on
the second flyweight.
Press the flyweights all the way onto the
guide.
CAUTION: Note the position of the springs.
Do not replace springs individually! If a
spring breaks or is fatigued, all two
springs must be replaced.
The illustration shows the inside of the clutch.
Reparaturanleitung PS-4600 / PS-5000
Repair Manual PS-32
Installing the clutch
Install the clutch with the arrow marking point
outside.
Torque: 35 ± 2.5 Nm
CAUTION: Before installing the clutch,
disassemble the starter (see chap. 06), in
order to prevent damage to the starting
catches.
___
13