Makita ADML815 Instruction Manual page 3

Cordless flashlight
Table of Contents

Advertisement

Available languages

Available languages

When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, seek medi-
cal help. Liquid ejected from the battery may
cause irritation or burns.
Do not use a battery pack or appliance
that is damaged or modified. Damaged or
modified batteries may exhibit unpredict-
able behaviour resulting in fire, explosion
or risk of injury.
Do not expose a battery pack or appli-
ance to fire or excessive temperature.
Exposure to fire or temperature above
130°C (265°F) may cause explosion.
Follow all charging instructions and do
not charge the battery pack or appli-
ance outside of the temperature range
specified in the instructions. Charging
improperly or at temperatures outside of the
specified range may damage the battery and
increase the risk of fire.
Have servicing performed by a quali-
fied repair person using only identical
replacement parts. This will ensure that the
safety of the product is maintained.
Do not modify or attempt to repair the
appliance or the battery pack except as
indicated in the instructions for use and
care.
Do not dispose of the battery(ies) in
a fire. The cell may explode. Check with
local codes for possible special disposal
instructions.
Do not open or mutilate the battery(ies).
Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be
toxic if swallowed.
Do not charge battery in rain, or in wet
locations.
Do not handle charger, including charger
plug, and charger terminals with wet
hands.
Do not charge the battery outdoors.
Important safety instructions for
battery cartridge
1.
Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using
battery.
2.
Do not disassemble battery cartridge.
3.
If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4.
If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
5.
Do not short the battery cartridge:
Do not touch the terminals with any con-
(1)
ductive material.
(2)
Avoid storing battery cartridge in a con-
tainer with other metal objects such as
nails, coins, etc.
(3)
Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
flow, overheating, possible burns and even a
breakdown.
Do not store the tool and battery cartridge in
6.
locations where the temperature may reach or
exceed 50 °C (122 °F).
Do not incinerate the battery cartridge even if
7.
it is severely damaged or is completely worn
out. The battery cartridge can explode in a fire.
8.
Be careful not to drop or strike battery.
9.
Do not use a damaged battery.
10. The contained lithium-ion batteries are subject to
the Dangerous Goods Legislation requirements.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on pack-
aging and labeling must be observed.
For preparation of the item being shipped, consult-
ing an expert for hazardous material is required.
Please also observe possibly more detailed
national regulations.
Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move
around in the packaging.
11.
When disposing the battery cartridge, remove
it from the tool and dispose of it in a safe
place. Follow your local regulations relating to
disposal of battery.
12. Use the batteries only with the products
specified by Makita. Installing the batteries to
non-compliant products may result in a fire, exces-
sive heat, explosion, or leak of electrolyte.
13. If the tool is not used for a long period of time,
the battery must be removed from the tool.
SAVE THESE INSTRUCTIONS.
CAUTION:
Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causing fires, personal injury and damage. It will
also void the Makita warranty for the Makita tool and
charger.
Tips for maintaining maximum
battery life
1.
Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2.
Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3 ENGLISH

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dml815

Table of Contents