Figure 5-10: Confirmation Screen; Figure 5-11: Congratulations Screen - Linksys WAP54GPE User Manual

Wireless-G Exterior Access Point
10. On the Confirmation screen, make sure your new settings are correct. To save your new settings, click the
Yes button. If you do not want to save your changes, then click the No button.
11. At this point, the configuration performed with the Setup Wizard is complete. To configure any other Access
Points in your network, you can run this Setup Wizard again.
Click the Online Registration button to register the Access Point, or click the Exit button to exit the Setup
Wizard.
For more advanced configuration, you can go to "Chapter 6: Configuring the Wireless-G Exterior
Chapter 5: Setting Up the Wireless-G Exterior Access Point
Setup Wizard
Access Point."

Figure 5-10: Confirmation Screen

Figure 5-11: Congratulations Screen

16