Figure 6-12: Wireless Repeater Diagram; Figure 6-13: Site Survey Screen - Linksys WAP54GPE User Manual

Wireless-G Exterior Access Point
Wireless Repeater. When set to Wireless Repeater mode, the Wireless Repeater is able to talk to up to three
remote access points within its range and retransmit its signal. (This feature only works with the Linksys
Wireless-G Exterior Access Point (model number: WAG54GPE), Wireless-G Access Point (model number:
WAP54G), and Wireless-G Broadband Router (model number: WRT54G).

Figure 6-12: Wireless Repeater Diagram

To configure a Wireless Repeater environment, click Wireless Repeater and enter the local MAC addresses of
the remote access points in the MAC 1-3 fields. If you do not know an access point's MAC address, click the Site
Survey button. Select the access points you want to use and click the Apply button. Then click the Close button
to return to the AP Mode screen. If you do not see the access point you want, click the Refresh button to run
another site survey.

Figure 6-13: Site Survey Screen

Chapter 6: Configuring the Wireless-G Exterior Access Point 28
The AP Mode Tab