Figure 5-2: Connecting The Access Point; Figure 5-3: Select An Access Point - Linksys WAP54GPE User Manual

Wireless-G Exterior Access Point
3. The next screen displayed shows how the Access Point should be connected as you run the Setup Wizard.
Optimally, you should perform this setup through a PC on your wired network. Click the Next button to
continue or Exit to exit the Setup Wizard.
4. The Setup Wizard will run a search for the Access Point within your network and then display a list along with
the status information for the selected access point. If this is the only access point on your network, it will be
the only one displayed. If there are more than one displayed, select the Access Point by clicking on it. Then
click the Yes button to continue or No to exit the Setup Wizard.
Chapter 5: Setting Up the Wireless-G Exterior Access Point
Setup Wizard

Figure 5-2: Connecting the Access Point

Figure 5-3: Select an Access Point

11