Table of Contents
Advertisement
Linksys
Data - User Accounts Screen
User Account Table
User Name
Enter the User Name to connect to the access
point's admin interface User Name is effective
once you save settings
User Name can include up to 63 characters Special
characters are allowed
User Level
Only administrator account has Read/Write
permission to the access point's admin interface
All other accounts have Read Only permission
New Password
Enter the Password to connect to the access point's
admin interface
Password must be between 4 and 63 characters
Special characters are allowed
Confirm New Password
Re-enter password
Time Screen
Click Time on the Administration menu to configure system time of the device
Figure 10: Time Screen
Data - Time Screen
Time
Current Time
Display current date and time of the system
Manually
Set date and time manually
Automatically
When enabled (default setting) the access point will get the
current time from a public time server
Time Zone
Choose the time zone for your location from the drop-down
list If your location observes daylight saving time, enable
"Automatically adjust clock for daylight saving changes "
Start Time
Specify the start time of daylight saving
End Time
Specify the end time of daylight saving
Offset
Select the adjusted time of daylight saving
NTP
NTP Server 1
Enter the primary NTP server It can be an IPv4 address or a
domain name
Valid characters include alphanumeric characters, "_", "-"
and " " Maximum length is 64 characters
NTP Server 2
Enter the secondary NTP server It can be an IPv4 address or
a domain name
Valid characters include alphanumeric characters, "_", "-"
and " " Maximum length is 64 characters
CHAPTER 2 Access Point Setup
6
Advertisement
Table of Contents
