Figure 3-3: Connect The Ethernet Network Cable; Figure 3-4: Connect The Power Adapter - Linksys SPA2002 User Manual

Analog Telephone Adapter with 2 FXS Ports
3. Connect the included Ethernet network cable to the ETHERNET port of the Phone Adapter.
Connect the other end to one of the Ethernet ports on your router or gateway.
4. Connect the included power adapter to the POWER port on the back panel of the Phone Adapter.
Connect the other end to a standard electrical outlet.
5. The Status and Act LEDs will be solidly lit when the Phone Adapter is ready for use.
6. Follow the instructions provided by your Internet phone service provider.
If you need to manually configure the Phone Adapter's network settings, you can use the telephone connected
to the Phone Adapter. See "Chapter 4: Using the Phone Adapter's Interactive Voice Response Menu" for
instructions.
The installation of the Phone Adapter is complete. Now you can pick up your phone and make calls.
Chapter 3: Connecting the Phone Adapter
Connecting the Phone Adapter

Figure 3-3: Connect the Ethernet Network Cable

Figure 3-4: Connect the Power Adapter

5