Grizzly PRO QUIET Series Owner's Manual page 5

Improper operation or maintenance of this product could result in serious injury and
WARNING!
property damage. Read and understand all warnings and operating instructions before
using this equipment. When using air tools, basic safety precautions should always be
followed to reduce the risk of personal injury.
Save These Important Safety Instructions!
Read and understand all of these safety instructions. Be sure to retain them for future use.
Hazard Warnings
Dust from power sanding, sawing, grinding, drilling, and other construction activities
WARNING!
contain chemicals known to the state of California to cause cancer, birth defects or other
reproductive harm.
Dust
These chemicals may include (but are not limited to) the following:
Lead from lead-based paints
•
Crystalline silica from bricks, cement, and other masonry products
•
Arsenic and chromium from chemically-treated lumber
•
The risk from these exposures vary, depending on how often you do this type of work. To reduce your exposure to these
chemicals: work in a well-ventilated area and work with approved safety equipment. Always wear ANSI-approved, properly-
fitted face masks or respirators when using such tools. Always follow basic safety precautions when using air tools to reduce
the risk of personal injury.
Bursting:
Rust can weaken the tank. Drain the condensed water from the tank after each use to reduce rusting. If a leak is
detected in the tank, replace the tank immediately. Do not weld, drill, or modify the air tank of this compressor.
Welding or modifications on the air compressor tank can severely impair tank strength and cause an extremely
hazardous condition. Welding or modifying the tank in any manner will void the warranty.
Check the maximum pressure rating for air tools and accessories. Compressor outlet pressure must be regulated so as not to
exceed the maximum pressure rating of the tool. Relieve all pressure in the hose before attaching or removing accessories.
Do not tamper with the pressure switch or relief valve for any reason. Doing so voids all warranties. They have been
pre-set at the factory for the maximum pressure of this unit. Personal injury and/or property damage may result if the
pressure switch or the relief valve are tampered with.
Do not use plastic or PVC pipe for compressed air. Use only galvanized steel pipe & fittings for compressed air
distribution lines.
SAFETY RULES
5