Makita DS4012 Technical Information page 7

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Spindle, Gear section
DISASSEMBLING
(3) Ball bearing 626LLB can be removed as drawn in Fig. 6.
If Ball bearing 626LLB is left in Gear housing complete during the disassembly of gear section, remove Ball bearing
626LLB as drawn in Fig. 6A.
Fig. 6
Remove Ball bearing 626LLB
from Gear complete 7-41
with 1R269.
Gear complete 7-41
Fig. 6A
1. Insert the shaft of Gear complete 7-41
into Ball bearing 626LLB again.
Gear
complete 7-41
Ball bearing 626LLB
(4) Ball bearing 6202LLB can be removed from Spindle as drawn in Fig. 7.
Fig. 7
1. Receive Ball bearing 6202LLB on 1R037, and then press down Spindle from Ball bearing 6202LLB.
1R269
Ball bearing
626LLB
2. Tilt the inserted Gear complete 7-41
and tap the edge of Gear housing
complete with Plastic hammer.
Spindle
Ball bearing
6202LLB
1R037
3. Ball bearing 626LLB
is removed together
with Gear complete.
Ball bearing
626LLB
Ball bearing
6202LLB
Spindle
P 7/ 12
Arbor press.