Makita GLC03 Instruction Manual page 14

4. Wipe and shake dust off the high performance
prefilter and HEPA filter by hand.
Fig.32
5.
Wash the high performance prefilter and HEPA
filter in soapy water. Rinse and dry them thoroughly in
the shade before use.
Fig.33
NOTE: Avoid fastening the attachment end (rubber
sealing ring) of HEPA filter when hanging it up for
drying.
6.
Attach the high performance prefilter onto the
HEPA filter.
Fig.34
► 1 . High performance prefilter 2. HEPA filter
1
2
14 ENGLISH
7. Hold the mounting end of HEPA filter (covered with
high performance prefilter) and squeeze it back into the
cleaner body.
Fig.35
► 1 . HEPA filter (covered with the high performance
prefilter) 2. Cleaner body
Sponge sheet
1. Disassemble the cyclone unit from the cleaner
body.
2.
Hold the mounting end of filter and pull it apart
from the cleaner body.
Fig.36
► 1 . Filter 2. Cleaner body
3. Pull the sponge sheet off from the suction
opening.
Fig.37
► 1 . Sponge sheet 2. Suction opening
1
2
1
2
2
1