Makita GLC03 Instruction Manual page 10

You can store the corner nozzle in the nozzle holder.
2
Fig.13
► 1 . Nozzle holder 2. Corner nozzle
CAUTION:
Be careful not to trap finger(s)
between the corner nozzle and the nozzle holder.
Trapping finger(s) may cause injury.
Corner nozzle + Extension wand
(Straight pipe)
In tight quarters where the cleaner itself cannot
squeeze in, or in high places hard to reach, use this
arrangement.
Fig.14
► 1 . Corner nozzle 2. Extension wand 3. Cleaner body
Cleaning without nozzle
You can pick up powder and dust without nozzle.
Fig.15
1
3
1
2
10 ENGLISH
For picking up dust on a floor in a standing position, it is
convenient to attach the extension wand (straight pipe)
to the cleaner.
Fig.16
► 1 . Extension wand
Disposing of dust
CAUTION:
Empty the dust case before it
becomes too full, or the suction force weakens.
CAUTION:
Be careful not to trap finger(s)
between the dust case and cyclone body when
reassembling.
Dispose of accumulated dust as follows before it
exceeds the dust disposal line.
1. Point the cleaner head downwards, hold the dust
case firmly, and then pull it apart from the cyclone body
while pressing and holding the release buttons on both
sides of the dust case.
1
Fig.17
► 1 . Dust disposal line 2. Dust case 3. Release but-
tons 4. Mesh filter
1
3
2
4