Table of Contents
Advertisement
To set Auto Clean:
1. On any Web Administration page, click Configurations.
2. If a checkmark appears in the box next to Enable Auto Clean, the option is
3. Click submit.
Set Ethernet Configurations
When you originally installed the SuperLoader, you set the Ethernet connections
through the front panel. However, you can change them through the Web
Administration tool.
To change the Ethernet configurations:
1. On any Web Administration page, click Configurations.
2. On the secondary menu, click Networking.
Figure 77: Networking options
1/16 Tape SuperLoader Reference Guide
enabled. To disable Auto Clean, click the box to remove the checkmark. If no
checkmark appears in the box next to Enable Auto Clean, the option is
disabled. To enable Auto Clean, click the box to enter a checkmark.
The current settings appear on the screen.
SuperLoader Operation
85
Advertisement
Table of Contents
